2 configuration | interface | ge – Comtech EF Data CDD-880 User Manual
Page 79
CDD-880 Multi Receiver Router
Revision 1
Ethernet-based Remote Product Management
MN-CDD880
5–19
o
Auto*
o
100 BaseT / Half Duplex
o
10 BaseT / Half Duplex
o
1000 BaseT / Full Duplex o 100 BaseT / Full Duplex
o
10 BaseT / Full Duplex
* Auto is the recommended configuration selection.
• Negotiated Link Mode (read‐only) – The actual negotiated line speed and duplex setting for
the ‘ETHERNET | TRAFFIC / MANAGEMENT | GE’ port is displayed here. The viewable
settings are:
o
1000 BaseT / Full Duplex o 100 BaseT / Full Duplex
o
10 BaseT / Full Duplex
o
100 BaseT / Half Duplex
o
10 BaseT / Half Duplex
Set the desired configurations. Click [Submit] to save.
5.4.4.3.1.2
Configuration | Interface | GE
The ‘Configuration | Interface | GE’ page permits the user to configure the rear panel
‘ETHERNET | TRAFFIC | GE’ 10/100/1000 BaseT Gigabit Ethernet port.
Figure 5‐10. Configuration | Interface | GE page
GE Interface
The information and configuration options provided on these pages are identical to those
featured on the ‘Configuration | Interface | FE Mgt’ page. See Sect. 5.4.4.3.1.1 for information
about using these features.