Comtech EF Data CDD-880 - Manual (Page 64)

CDD-880 Multi Receiver Router Revision 1
Ethernet-based Remote Product Management MN-CDD880
5–4
The user defines two Community Strings for SNMP access:
• Read Community
default = public
• Write Community
default = private
For proper SNMP operation, the CDD‐880 MIB files must be used with the associated
version of the CDD‐880 router M&C. Refer to the CDD‐880 FW Release Notes for
information on the required FW/SW compatibility.
5.4 Web Server (HTTP) Interface
A user‐supplied Web browser allows the full monitoring and control (M&C) of the CDD‐880 from
its Web Server Interface. The CDD‐880 embedded Web application is designed for, and works
best with, Microsoft Internet Explorer Version 7.0 or higher.
5.4.1 User Login
Type the CDD‐880 Management IP Address (shown here as http://xxx.xxx.xxx.xxx) into the
Address area of the user PC Web browser:
The login page opens.
Enter the assigned User Name and
Password – the default for both is
comtech. Click [Log On].
If the User Name and Password are
accepted: The CDD‐880 Multi Receiver
Router Web Server Interface Home
page, similar to the example shown
here, appears: