Comtech EF Data CDD-880 - Manual (Page 73)

CDD-880 Multi Receiver Router Revision 1
Ethernet-based Remote Product Management MN-CDD880
5–13
The complete roster of FAST Accessible Options is as follows:
Option Option Installation Method
Demod Card / VersaFEC Up to six (6) dual demodulator cards installable. Hardware / FAST
Aggregate Rx Data Rate
(CCM) and Symbol Rate
(ACM)
Up to 10 Mbps (CCM) or 4 Msps (ACM)
FAST
Up to 25 Mbps (CCM) or 10 Msps (ACM)
Up to 50 Mbps (CCM) or 20 Msps (ACM)
Max Data Rate (CCM) or Symbol Rate (ACM) for use
with dSCPC only
Rx Header Decompression
Enabled N/A
Rx Payload Decompression
FAST Upgrade
Serial Number (read‐only) – The serial number of the unit is required by Comtech EF Data when
ordering FAST option upgrades. Take note of this number before contacting Comtech EF Data to
order a CDD‐880 FAST option upgrade.
Once a FAST upgrade order is placed and confirmed, the Comtech EF Data sales representative
will provide a 20‐digit FAST Access Code. To perform the CDD‐880 FAST option upgrade:
Step Task
1 Use the FAST Configuration section of the page to view the currently installed
features.
2 Make note of the unit Serial
Number provided in the
Upgrade section of the page:
Serial Number: __________________________
3 Contact a Comtech EF Data sales representative during normal business hours:
• Provide the unit Serial Number to the representative.
• Identify and purchase the desired FAST option(s).
• Obtain the invoice, the 20‐digit FAST Access Code, and the FAST option activation
instructions.
4 Carefully enter the FAST Access Code into the FAST Code register text box.
5 Click [Submit] to execute the upgrade.
6 Refer back to the FAST Configuration section. The unit either accepts or rejects the
code, and the FAST Configuration section refreshes to reflect any upgrades in
operation.