Comtech EF Data CDD-880 - Manual (Page 21)

CDD-880 Multi Receiver Router Revision 1
Introduction MN-CDD880
1–3
• Sect. 5.3 SNMP (MIB II and Private MIB)
• Sect. 5.4 Web Server (HTTP) Interface
• Chapter 6. SERIAL‐BASED REMOTE PRODUCT MANAGEMENT
The unit runs on an embedded operating system in non‐volatile Flash memory. It does not have
moving parts for media storage.
The unit features a high performance processor and a real‐time operating system (RTOS)
combined with multiple Field Programmable Gate Arrays (FPGAs).
Field update of the operating system firmware is possible through file upload via satellite or the
Ethernet port.
Chapter 4. UPDATING FIRMWARE
Field activation of software‐based options is possible through Comtech’s FAST (Fully Accessible
System Topology) Feature upgrade process.
• Sect. 5.4.4.2.3 (CDD‐880 Web Server Interface) Admin | FAST Page
• Appendix A. FAST
1.3 CDD-880 Features
1.3.1 Physical Description
The CDD‐880 Multi Receiver Router is constructed as a 1RU‐high rack‐mounting chassis. Handles
at the front facilitate removal from and placement into a rack. The unit can be free‐standing if
desired.
• Sect. 1.4 CDD‐880 Specifications
• Sect. 2.2 Installation into a Rack Enclosure