Comtech EF Data CDD-880 - Manual (Page 34)

CDD-880 Multi Receiver Router Revision 1
Installation MN-CDD880
2–4
2.2.1 Installing the Optional Rear-Mounting Support Brackets Kit
Tools needed to install the KT‐0000168 (4”) or KT‐0000195 (10”) Bracket Kit:
• A medium Phillips™ screwdriver
• A 5/32‐inch SAE Allen™ Wrench
• An adjustable Crescent™ wrench.
To install the kit:
Step Description
1
Assemble the Adapter Plates to the back side of the CDD‐880 chassis using the #10
Flat Head Screws.
2
Assemble the #10 Shoulder Screws through the Adapter Plate mounting slots using
the #10 Flat Washers, #10 Split Washers, and #10 Hex Nuts.
3
Mount the Rear Support Brackets to the rack enclosure threaded rear mounting
rails using the #10 Rack Bracket Bolts.
4
Slide the CDD‐880 into the front of the rack enclosure. Make sure that the #10
Shoulder Screws properly engage into the slots of the Rear Support Brackets.