Comtech EF Data CDD-880 - Manual (Page 110)

CDD-880 Multi Receiver Router Revision 1
Serial-based Remote Product Management MN-CDD880
6–10
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction &
Qualifier)
Response to Query
Management IP
Address IPA= 18 bytes
numerical
Command or Query.
Sets the IP Address and network prefix for the 10/100/1000 Base T Ethernet
traffic/management port, in the form aaa.bbb.ccc.ddd/yy, where:
(Permitted ranges – cannot all be zero)
aaa = 0-223
bbb = 0-255
ccc = 0-255
ddd = 0-255
yy = network prefix (range: 8 to 31)
Example: IPA=010.006.030.001/24
IPA=
IPA?
IPA*
IPA#
IPA? IPA=xxx.xxx.xxx.xxx/yy
(see Description of
Arguments)
GE1 Link
Configuration LC1= 1 byte, value 0
thru 5 Command or Query.
GE1 Interface mode, where:
0 = Auto Negotiate
1 = 1000Mbps -Full Duplex
2 = 100Mbps – Full Duplex
3 = 100Mbps – Half Duplex
4 = 10Mbps – Full Duplex
5 = 10Mbps – Half Duplex LC1=
LC1?
LC1*
LC1#
LC1? LC1=x
(see Description of
Arguments)
Management
MAC Address N/A 12 bytes, alpha-
numerical Query only.
Returns the unique MAC Address for the modem.
Example: MAC=00:06:B0:00:01:C2 N/A MAC? MAC=aabbccddeeff
(see Description of
Arguments)
GE MAC
Address N/A 12 bytes, alpha-
numerical Query only.
Returns the unique GE MAC Address.
Example: MG1=00:06:B0:00:01:C2 N/A MG1? MG1=aabbccddeeff
(see Description of
Arguments)
Management
Link
Configuration MLC= 1 byte, value 0
thru 5 Command or Query.
Management Interface mode, where:
0 = Auto Negotiate
1 = reserved
2 = 100Mbps – Full Duplex
3 = 100Mbps – Half Duplex
4 = 10Mbps – Full Duplex
5 = 10Mbps – Half Duplex
MLC =
MLC?
MLC *
MLC #
MLC ? MLC =x
(see Description of
Arguments)