Comtech EF Data CDD-880 - Manual (Page 27)

CDD-880 Multi Receiver Router Revision 1
Introduction MN-CDD880
1–9
Specification Parameters
Data and Management Interface 10/100 BaseT Fast Ethernet RJ-45 port
Terrestrial Traffic Interface 10/100/1000 BaseT Gigabit Ethernet (<360 Mbps) RJ-45 port
Command Line Interface (CLI) EIA-232 via DB-9 CONSOLE port
Figure 1‐6. Rx Carrier Level vs. Symbol Rate (L‐Band 950 – 2150 MHz)
1.4.1.2 Low Noise Block Converter (LNB) Support
Parameters Specifications
LNB Voltage +13 volts, +18 volts per DiSEq, and +24 volts DC at 500 mA maximum
Current Alarm Programmable minimum/maximum alarms
1.4.1.3 Environmental and Physical
Parameters Specifications
Temperature
Operating 32 to 122 °F (0 to 50°C)
Storage -4 to 158 °F (-20 to 70°C)
Humidity
Operating 95% maximum, non-condensing
Storage 99% maximum, non-condensing
Power Supply
AC Includes an on/off switch
DC Includes an on/off switch and an input filter per PL-0000551 and PL/10312-1 Kits
Operating
Voltage
AC 100 – 240 Volts AC +6%/-10% autosensing (total absolute max. range is 90 – 254 volts AC)
DC 48 Volts nominal (total range is 36 to 60 volts)
Power Consumption 60 W typical