Compuprint 9058 Programmer Manual - Manual (Page 85)

COMPUPRINT Mode
A78408098-003 83
2 of 5
DC4 DC4 ESC! n 16 p EM
Bidirectional BID-25 bar code data fields do not have a defined
format length and contain numeric data only:
question marks will be printed in place of HRC
string otherwise, if possible. If o check digit option
field takes 1 value an internally generated check
digit will be added to the encoded string, that
however will not show on the required HRC string.
2 of 5
DC4 DC4 ESC! n 17 p EM
Interleaved The 2/5-INTERLEAVED bar code does not have a
defined format length. However, the total sum of
the characters must be even. n indicates the bar
code height and must be in the range 1 to 12. p
must be NUL (hex. 00) if no Human Readable
Characters are to be printed, and 1 (hex. 01) if
they are to be printed.
2 of 5
DC4 DC4 ESC ! n 18 p EM
Industrial The 2/5 INDUSTRIAL bar code. Data format
length is variable and the supported character set
only provides ASCII numeric figures 0 to 9. N
indicates the bar code height in units of 1/6 inch
and must be in the range 1 to 12. The parameter p
must be NUL (hex. 00) if no Human Readable
Characters are to be printed, and 1 (hex. 01) if they
are to be printed.