Compuprint 9058 Programmer Manual - Manual (Page 28)

EPSON/IBM Mode
A78408098-003 26
ESC :
Sets 12 CPI. (IBM)
ASCII Code ESC :
Hexadecimal Value 1B 3A
Decimal Value 27 58
This is a terminator code. It causes all data present in the print
buffer to be printed. Subsequent data will be printed at 12 cpi. This
command is accepted at any position within the line. The setting of
another horizontal spacing resets this command.
ESC <
Prints characters for one line from left to right. (EPSON)
ASCII Code ESC <
Hexadecimal Value 1B 3C
Decimal Value 27 60
This command causes the printing of one line from left to right.
ESC [ @
Selects the printing type style. (IBM 2391 only)
ASCII Code ESC [ @ 4 0 m
1
0 m
3
m
4
Hexadecimal Value 1B 5B 40 04* 00* m
1
00* m
3
m
4
Decimal Value 27 91 64 4 0 m
1
0 m
3
m
4
(*) These values are constant.
This command is used to modify the type style of the character and
the number of line spacing. Use this command for:
1. Italic printing
2. Single-high character
3. Double-high character
4. Single-wide character
5. Double-wide character
6. Single Line Feed
7. Double Line Feed