Compuprint 9058 Programmer Manual - Manual (Page 12)

EPSON/IBM Mode
A78408098-003 10
For negative (left) movement:
Where n
2
is equal to:
1
[(current position) – (horizontal position)] x
(
defined unit
)
32768-INIT
256
Where n
1
is equal to:
1
[(current position) – (horizontal position)] x
(
defined unit
)
32768-MOD
256
The default unit is 1/120 inch in Draft mode and 1/180 inch in LQ
mode. If it would move the print position outside the printing area,
the printer ignores this command.
ESC +
Sets n/360-inch line spacing. (EPSON)
ASCII Code ESC + n
Hexadecimal Value 1B 2B n
Decimal Value 27 43 n
Range 0 < n < 255
This command sets the line spacing to n/360 inch. If the line spacing is
changed, it does not affect previous settings for vertical tabs or page
length.
ESC / m
Selects the Vertical Format Unit (VFU) channel. (EPSON)
ASCII Code ESC + n
Hexadecimal Value 1B 2F n
Decimal Value 27 47 n
Range 0 < n < 7
This command selects the vertical tab set m. The values for m specifies
the number of the tab set being changed. These sets of tabs are called
vertical format unit (VFU) channels.