Compuprint 9058 Programmer Manual User Manual
Page 59
EPSON/IBM Mode
A78408098-003
57
DC1
Selects printer. (IBM)
ASCII Code
DC1
Hexadecimal Value
11
Decimal Value
17
This command causes the printer to be enabled after it has been
disabled by the ESC Q command.
DC1
Selects printer. (EPSON)
ASCII Code
DC1
Hexadecimal Value
11
Decimal Value
17
This command causes the printer to be enabled after it has been disabled
by the DC3 command.
DC3
Deselects printer. (EPSON)
ASCII Code
DC3
Hexadecimal Value
13
Decimal Value
19
This code deselects the printer. The printer remains deselected until it
receives a DC1 command or power is turned off then on again. The
printer ignores the ESC @ command (initialize printer) when it is
deselected.
This manual is related to the following products: