Compuprint 9058 Programmer Manual - Manual (Page 70)

COMPUPRINT Mode
A78408098-003 68
DC4 DC4 ESC 9
Selects ASF Bin 2 for paper loading. (Compuprint)
ASCII Code DC4 DC4 ESC 9
Hexadecimal Value 14 14 1B 39
Decimal Value 20 20 27 57
This command loads a cut sheet from the bin 2 of the Automatic Sheet
Feeder.
//n//
ASF and Bin selection. (Compuprint)
ASCII Code //n//
Hexadecimal Value 2F 2F n 2F 2F
Decimal Value 47 47 n 47 47
This command must start and finish with a CR, a LF or both; otherwise it
will be handled as if it were printable data.
n Effect
1 Selects bin 1
2 Selects bin 2
3 Selects bin 3
C Selects bin 1 once then bin 2. First sheet fed from bin 1 and
following from bin 2.
R After ejecting the printed sheet from the ASF.
For printer models without the manual loading mode, the
LOAD ASF x
message is displayed, where x value is the
default ASF bin.
For printer models with manual loading mode, pressing
PATH key disables/enables the manual path (MANUAL FORM
message is displayed).