Compuprint 9058 Programmer Manual - Manual (Page 56)

EPSON/IBM Mode
A78408098-003 54
p
2
Sum of the values corresponding to the dots that should be
printed in the second column of the graphics pattern.
p
x
Sum of the values corresponding to the dots that should be
printed in the last column of the graphics pattern.
ESC L
Double density dot graphics printing (120 dpi). (IBM, EPSON)
ASCII Code ESC L n
1
n
2
p
1
p
2
... p
x
Hexadecimal Value 1B 4C n
1
n
2
p
1
p
2
... p
x
Decimal Value 27 76 n
1
n
2
p
1
p
2
... p
x
Range 0 < n
1
< 255
0 < n
2
< 31
0 < p < 255
Terminator code. This command prints dot graphics at 120 horizontal
dot per inch by 60 vertical dpi. The parameter values should be
calculated as follows:
n
1
Remainder of the number of column divided by 256.
n
2
Integer result of the previous division.
p
1
Sum of the values corresponding to the dots that should be
printed in the first column of the graphics pattern.
p
2
Sum of the values corresponding to the dots that should be
printed in the second column of the graphics pattern.
p
x
Sum of the values corresponding to the dots that should be
printed in the last column of the graphics pattern.