Compuprint 9058 Programmer Manual - Manual (Page 44)

EPSON/IBM Mode
A78408098-003 42
SO
Sets double width printing (one line). (IBM, EPSON)
ASCII Code SO
Hexadecimal Value 0E
Decimal Value 14
This code causes subsequent data in the same line to be printed as
double width characters. It is canceled by the LF, FF, VT, DC4, ESC
W codes o when the buffer is full. This command is not canceled by
the VT command when it functions the same as a CR command.
Character Set
ESC [ T
Selects a Code page.
ASCII Code ESC [ T 4 0 0 0 HC L.c
Hexadecimal Value 1B 5B 54 04 00 00 00 Hc Lc
Decimal Value
27 91 84 4 0 0 0 Hc Lc
This sequence allows changing the current code page. If an
unavailable code page is specified, this command is ignored.
The digits 04 00 00 00 (hexadecimal) and 4 0 0 0 (decimal) are
constant.
To calculate Hc Lc for a code page that is not shown.
Divide the code page number, such as 437, by 256.
- The whole number result is the Hc value
- The remainder is the Lc value.
If your code page has an alphabetic character, such as 437G, add
10,000 to the code page number, then divide by 256.