Compuprint 9058 Programmer Manual - Manual (Page 75)

COMPUPRINT Mode
A78408098-003 73
Bar Code Description
EAN-8
DC4 DC4 ESC! n 1 p EM
The EAN-8 bar code data field must only contain
numeric data, and must be eight bytes long, check digit
included. The EAN-8 character repertoire provides 0 to
9 ASCII numeric figures. n indicates the bar code height
in units of 1/6 inch and must be in the range 1 to 12. p
must be NUL (hex. 00) if no Human Readable
Characters are to be printed, and 1 (hex. 01) if they are
to be printed. The range of values for n and p
parameters can be increased of 32 dec.
EAN-13
DC4 DC4 ESC! n 2 p EM
The EAN-13 bar code data field must only contain
numeric data, and must be 13 bytes long, check digit
included. The EAN-13 character repertoire provides 0 to
9 ASCII numeric figures. n indicates the bar code height
in units of 1/6 inch and must be in the range 1 to 12. If
you want to print the Human Readable Characters, p
must have the value 1 (hex. 01); otherwise this value
must be NUL (hex. 00). The range of values for n and p
parameters can be increased of 32 dec.
UPC-A
DC4 DC4 ESC! n 3 p EM
The UPC-A bar code data field allows 10 numeric
characters plus one system number digit and one check
digit, at the leftmost and rightmost positions
respectively. The UPC-A character repertoire provides 0
to 9 ASCII numeric figures. n indicates the bar code
height in units of 1/6 inch and must be in the range 1 to
12. p must be NUL (hex. 00) if no Human Readable
Characters are to be printed, and 1 (hex. 01) if they are
to be printed. The range of values for n and p
parameters can be increased of 32 dec.