Compuprint 9058 Programmer Manual - Manual (Page 83)

COMPUPRINT Mode
A78408098-003 81
Code 11
DC4 DC4 ESC ! n 14 p EM
CODE-11 bar code fields do not have a defined
format length and contain data belonging to the
character set listed below:
0 1 2 3 4 5 6 7 8 9 -
Question marks will be printed in place of HRC
string otherwise, if possible.
This bar-code type defines a variable
WIDE/NARROW ratio. This bar code is printed at
1/180” horizontal and vertical graphical printing
resolution, to ensure high readability rate. Each
digit encodation is separated from the next by a
1/90”-1/60 “, wide default InterCharacter Gap.
CODE-11 has unique START/STOP character; the
printer generates the couple related to each symbol.
It is visually interpreted by an OPEN TRIANGLE
and will always appear on the HRC string, because
its size is usually varied to signify the number of
check digits being used in the particular symbol:
- SMALL open triangle means ONE check-digit
- LARGE open triangle means TWO check-digit
Due to this, f field is meaningless and always
defaults to HRC string print.