Compuprint 9058 Programmer Manual - Manual (Page 31)

EPSON/IBM Mode
A78408098-003 29
n Types
0 No change
From 1 to 127 Draft
From 128 to 254 Letter Quality
255 Return to NVRAM values
ESC [ I
Sets font and pitch of a character. (IBM 2391 only)
ASCII Code ESC [ I 2 0 m n
Hexadecimal Value 1B 5B 49 02 00 m n
Decimal Value
27 91 73 2 0 m n
This command allows modifying the font and pitch type style of a
character.
The values 2 and 0 are constants. If font lock and pitch lock are
active, this command is ignored. To select the values for the variables
m and n, which identify the pitch and the font type style to use, refer
to the table below.
1. Identify the type style (pitch and font) to use in the left column (pitch).
2. For the hexadecimal values for m n, look across the row to the
second column (Hex m n).
3. For the decimal values for m n, look across the row to the third
column (Decimal m n).
4. Substitute these values for m n in the printer command syntax.
Pitch Hexadecimal Decimal Decimal Value
m n m n (m x 256 + n)
Courier
10
00 0B 0 11 11
12 01 EB 1 235 491
15 01 EC 1 236 492
17 01 ED 1 237 493
20 01 EE 1 238 494
24 01 1E 1 30 286
PS 00 AB 0 171 171