Compuprint 9058 Programmer Manual - Manual (Page 36)

EPSON/IBM Mode
A78408098-003 34
ESC g
Sets 15 CPI. (EPSON)
ASCII Code ESC g
Hexadecimal Value 1B 67
Decimal Value 27 103
Subsequent data will be printed at 15 cpi. This command is accepted
at any position within the line. If you change the pitch during
proportional mode (selected with the ESC p command) the change
takes effect when the printer exits proportional mode.
ESC H
Cancels double strike printing. (IBM, EPSON)
ASCII Code ESC H
Hexadecimal Value 1B 48
Decimal Value 27 72
This command cancels double-strike printing with the ESC G command.
ESC I
Selects printing type for resident and DLL characters. (IBM)
ASCII Code ESC I n
Hexadecimal Value 1B 49 n
Decimal Value 27 73 n
This command selects the resident or the download font in Draft o LQ
printing mode. It is ignored if you select a font that has not been
downloaded or has been overwritten. See the following table:
n Resident font
0 Draft 10 cpi
2 LQ 10 cpi
3 Proportional
8 Draft 12 cpi
10 LQ 12 cpi
16 Draft 17 cpi
18 LQ 17 cpi