Compuprint 9058 Programmer Manual - Manual (Page 46)

EPSON/IBM Mode
A78408098-003 44
ESC ^
Prints a single character from the all characters table. (IBM)
ASCII Code ESC ^ n
Hexadecimal Value 1B 5E n
Decimal Value 27 94 n
Range 0 < n < 255
This command prints the next character from the all characters table.
This sequence prints only one character from the all character table.
ESC 6
Enables Upper Control Codes. (EPSON)
ASCII Code ESC 6
Hexadecimal Value 1B 36
Decimal Value 27 54
This command enables the printing of upper control codes (from 128 to
159). These codes are treated as printable characters instead of control
codes. This command has no effect when the italic character table is
selected and remains in effect even if you change the character table.
ESC 7
Selects the Character Set 1. (IBM)
ASCII Code ESC 7
Hexadecimal Value 1B 37
Decimal Value 27 55
This command selects the character set 1.