Compuprint 9058 Programmer Manual - Manual (Page 58)

EPSON/IBM Mode
A78408098-003 56
Terminator code. This command prints dot graphics at 240 horizontal
dot per inch by 60 vertical dpi. The parameter values should be
calculated as follows:
n
1
Remainder of the number of column divided by 256.
n
2
Integer result of the previous division.
p
1
Sum of the values corresponding to the dots that should be
printed in the first column of the graphics pattern.
p
2
Sum of the values corresponding to the dots that should be
printed in the second column of the graphics pattern.
Data Input Control
CAN
Cancels line. (EPSON)
ASCII Code CAN
Hexadecimal Value 18
Decimal Value 24
This code clears all printable characters and bit-image graphics on the
current line. This code moves the print position to the left-margin position.
CAN
Cancels data. (IBM)
ASCII Code CAN
Hexadecimal Value 18
Decimal Value 24
This code clears all data stored in the preceding print buffer but does
not change the current print position.