Compuprint 9058 Programmer Manual - Manual (Page 64)

EPSON/IBM Mode
A78408098-003 62
4 Initializes printer to factory settings. The download
font remains unchanged. If parameters are specified,
they will overwrite the default settings. If the
emulation mode is changed, the download font will
be initialized. This command will only copy the
default settings from ROM, add parameter changes,
if any, and store in working RAM; the data stored in
the macro’s non-volatile RAM will not be affected.
5 Initializes printer to factory settings. The download
font is initialized. If parameters are specified, they
will overwrite the default settings. This command
will only copy the default settings from ROM, add
parameter changes, if any, and store in working
RAM; the data stored in the macro’s non-volatile
RAM will not be affected.
254 Initializes printer to user-default settings. The
download font is initialized. If parameters are
specified, they will overwrite the default settings.
This command will change data stored in the
selected macro. It will copy data from the selected
macro, add parameter changes, if any, and store in
working RAM and in the selected macro. It will also
change the default macro to the value of parm 3.
255 Initializes printer to default settings. The download
font is initialized. If parameters are specified, they
overwrite the default settings. This command will
change data stored in the macro’s non-volatile RAM.
It will copy default settings from ROM, add
parameter changes, if any, and store in working
RAM and all macros. It will also set the default
macro to disable.
id The id parameter specifies the printer for which the
following parameter bytes are intended. If the ID does not
address your printer, the mode bytes that follow are
ignored. The ID values are Hex = B6, Dec = 182.