Beisler 1360-4 - Manual (Page 98)

D-29
Programming Instructions Automatic Multi-Head Serging Machine 1365-4 Beisler GmbH
D.3
Programming
Erasing a sewing program seam
A sewing program (e.g. M 01) consists of several seams. The content of
these seams, i.e. the sewing parameters, can be erased.
1. Select the programming menus:
• Press the ( key
2. Select the INITIAL PARAMETER function:
• Press the a key
Programming level 2 is displayed.
3. Select the ERASE SEAM function:
• Press the d key
4. Enter the number of the seam into the input field.
5. Start erasure:
• Press the ( key
The display shows the safety prompt * ARE YOU SURE?*.
6. Confirm erasure:
• Press the % key
The display shows * O.K. PLEASE WAIT* to indicate that the erasu-
re has been successfully completed.