Beisler 1360-4 - Manual (Page 89)

D-20
Programming Instructions Automatic Multi-Head Serging Machine 1365-4 Beisler GmbH
D.3
Programming
24 SENSING TIME CONTOUR ...
Contour control sensing time between fast-slow or slow-fast
00 Photocell 11/16 bright, puller lifted,
Photocell 11/16 dark, puller lowered
01 Puller always lowered (photocell 11/16 bright, slow,
Photocell 11/16 dark, fast
25 A-HEAD POSITION UP
EFKA position A machine, needle position at the end of the seam
(needle-up position)
26 B-HEAD POSITION UP
EFKA position B machine, needle position at the end of the seam
(needle-up position)
27 C-HEAD POSITION UP
EFKA position C machine, needle position at the end of the seam
(needle-up position)
29 C-HEAD ON/OFF MODUS...
Switch C machine on/off in combination with bonding station
00 C machine and bonding station off
01 C machine off, bonding station on
02 C machine on, bonding station off
03 C machine on, bonding station on
For systems without C machine, the bonding station must be swit-
ched on (01)
30 C-HEAD SEWING SPEED
Sewing speed of the C machine
31 C-PHOTOCELL -> FOOT DOWN
Time delay after the photocell detects the sewing piece before the
pressure foot is lowered and chain cutting is activated
32 C-FOOT DOWN -> SEWING
Time delay after the pressure foot has been lowered before the start
of sewing
33 C-CHAIN OFF TIME .....
Number of postsewing stitches that have to be sewn after the se-
wing piece has been sewn (must be fit to match for variable stitch
length)
34 C-CHAINING AT SEAM END
Duration of chain cutting function at the end of the seam, switch off
for energy saving
35 C-SEWING STOP -> FOOT UP
Time delay for lifting the pressure foot after the postsewing stitches
36 C-PHOTOCELL BLOCK TIME .......
Time delay for inserting a new sewing piece