Beisler 1360-4 - Manual (Page 34)

Operating Instructions Automatic Multi-Head Serging Machine 1365-4 Beisler GmbH
B-24
B.3
Operation
B.3.5 Resetting the day counter to zero
This function is used to reset the day counter to zero before a new production
cycle or after a completed cycle.
1. Move to access level 2:
• Press the akey
j
The display shows the symbols of the selectable functions on this le-
vel.
BD"yz!FH
abcdefgh
2. Select the function for resetting the day counter:
F
• Keep the gkey depressed for approx 3 seconds
The day counter is reset to zero.
3. Confirm reset and return to access level 1:
• Press the ( key.
Display:
S
= 0000
B.3.6 Moving the cross transport manually
Use this function for the manual transport of a sewing piece from the A
machine to the B machine. When the key is pressed, the two cross transport
stamps are lowered, and the transport moves to the pick-up position at the
B machine; from there, the remaining part of the machine cycle is trigge-
red automatically and continued.
1. Position the sewing piece below the two stamps.
2. Start the cross transport manually:
• Press the g key
n
The cross transport moves to the wait position in front of the B machi-
ne.
3. The automatic machine cycle continues.