Beisler 1360-4 - Manual (Page 81)

D-12
Programming Instructions Automatic Multi-Head Serging Machine 1365-4 Beisler GmbH
D.3
Programming
2. Fullness (quantity) for a section that has to be activated so that the
setting is enabled.
3. Length of an individual section for which fullness is to be enabled.
4. Function SLOW SEWING (only for differential transport setting)
NOTE - Quick access!
The quick access for fullness (value range -19 to +19) app-
lies only to an activated section. If a section is deactiva-
ted, sewing is performed using the basic settings or using
the specific values that have been set for a section.
Settings for differential transport and top transport:
1. Modify the value:
• Press the & or / key
or enter the two-digit value using the numeric keypad. Input se-
quence: Tens digit, units digit.
2. Confirm input and exit menu:
• Press the ( key
Section:
1. Activate/deactivate individual sections:
• Press the c to g key
2. Confirm input and exit menu:
• Press the ( key
Setting fullness (quantity) and length (cm) of the section:
The input firlds are scrolled from left to right.
1. Activate/deactivate input field:
• Press the $ or § key
2. Modify the value:
• Press the & or / key
or enter the two-digit value using the numeric keypad. Input se-
quence: Tens digit, units digit.
2. Confirm input and exit menu:
• Press the ( key