Programming – Beisler 1360-4 User Manual
Page 92

D-23
Programming Instructions Automatic Multi-Head Serging Machine 1365-4
Beisler GmbH
D.3
Programming
3. INSEAM SPEED
Sewing speed
INSEAM TOP FEEDING
Basic setting for fullness
inseam DIFFERENTIAL
Basic setting for fullness
PULLER ON/OFF
Switch puller on/off
01 Enable function
00 Disable function
Basic setting for fullness:
1. To move up or down in the parameter list:
Press the § or $ key
2. Activate the parameter input field:
Press the % key
3. Modify the value:
Press the & or / key
or enter a two-digit or three-digit value using the numeric keypad. In-
put sequence: Hundreds digit, tens digit, units digit.
4. Confirm input:
Press the ( key
5. Exit menu and return to access level 2:
Press the ( key
6. Return to access level 1:
Press the ( key
Reducing the machine sewing speed:
The A, B, and C machines can be activated manually.
y or z or !
1. Select the function:
Keep the d or e or f key depressed
The corresponding machine will operate as long as the function key
is depressed.