Beisler 1360-4 - Manual (Page 35)

Operating Instructions Automatic Multi-Head Serging Machine 1365-4 Beisler GmbH
B-25
B.3
Operation
B.3.7 Resuming the sewing process at the B machine
After the sewing process at the B machine has been interrupted, it can be
resumed by lining up the sewing piece at the contour guide photocell. This
manual interference in the machine cycle may be necessary e.g. if a failure
occurs in the cross transport.
1. Stop the sewing process of the B machine:
• Press the bkey
[
2. Resume the sewing process of the B machine:
The automatic sewing process is resumed when the sewing piece is lined
up manually at the photocell of the B machine.