Programming – Beisler 1360-4 User Manual
Page 96

D-27
Programming Instructions Automatic Multi-Head Serging Machine 1365-4
Beisler GmbH
D.3
Programming
3.2
Programming menus
You can use the programming menus for programming sewing pro-
grams and the pertaining seams.
Basically, it is possible to create entirely new sewing programs; howe-
ver, it is easier to:
copy a factory-programmed sewing program to a free location in the
memory and to modify this program in accordance with the produc-
tion requirements,
copy an already modified sewing program to a free location in the
memory and to modify it further in accordance with the intended pur-
pose.
For creating a new sewing program, the following working steps are re-
quired:
1. Occupy free memory.
2. Add new seams or copy existing seams into a sewing program.
3. Configure seams (as required by production).
NOTE - Backward scrolling in program levels!
When the programming menus are selected, the menu
used last is always displayed. This level is indicated by
the number (1) placed in front of the functions. For selec-
ting certain functions, you may have to scroll backward in
the programming and service menus.
Select the programming menus:
Press the ( key
Scroll backward in programming menus:
Press the + key
Occupying free memory
Sewing programs are stored in the memory (M).
The program control memory can contain up to 20 sewing programs
(M 01-M 20). At the factory, sewing programs are programmed to me-
mory locations M 01, M 02 and M 03.
1. Request free memory location:
Taste ) drücken
2. Enter two-digit numeric description using the numeric keypad.