Beisler 1360-4 - Manual (Page 20)

Operating Instructions Automatic Multi-Head Serging Machine 1365-4 Beisler GmbH
B-10
B.2
Functions of the machine
B.2.5 Width distribution for knee lining
To ensure the correct width distribution, the transport characteristics of dif-
ferential transport and top transport must be matched to fit the material of
the knee lining. This is required when waved lining is sewn.
Presetting, Fig. 8:
In the sewing range of side seam A
and inseam B, the trousers panel
splits into five sections with the knee
lining C extending over four of the-
se sections. For each section, the
length can be varied and the pertai-
ning fullness (quantity) can be preset
with the program control (see Sec-
tion D, Programming Instructions).
Quick adjustment, Fig. 9:
The operating panel allows direct access for
the quick adjustment of the fullness by mo-
difying top transport 2 and differential trans-
port 1. Select the corresponding function and
modify it in a range between -19 and +19.
S1
S5 S4 S3 S2 S1
S2 S3 S4 S5
A
B
C
Fig. 8
Fig. 9