Beisler 1360-4 - Manual (Page 51)

C-11
Service Instructions Automatic Multi-Head Serging Machine1365-4 Beisler GmbH
C.5
Maintenance
C.5.3Service
The following service works must be carried out in the specified inter-
vals.
Checking the sewing head oil level (daily):
1. The oil level is checked at the sewing head sight glass.
The level must be between the marks for the upper and
lower limits. If the level drops below the mark for the mi-
nimal level, refill oil.
2. For details on the recommended oil type and refilling
procedure, please refer to the operating instructions of
the sewing heads that are attached to this machine.
Fig. 3: Emptying the water separator (weekly):
1. Have a suitable container available.
2. Drain water at pressure reducer water separator.
Press button 1 at pressure reducer collector and keep
it depressed until all the water has been drained.
Fig. 3