Beisler 1360-4 - Manual (Page 104)

D-35
Programming Instructions Automatic Multi-Head Serging Machine 1365-4 Beisler GmbH
D.3
Programming
F2 CLAMP MOTOR SPEED
The nominal speed of the stepper motor is compared to the actu-
al motor speed.
1. Enter the desired speed at the numeric keypad.
2. Confirm input and start measurement:
• Press the % key
The motor starts running, the actual speed is measured and displayed.
3. Complete test:
• Press the ( key
F3 CL.MOT. DURATION TEST
The stepper motor of the cross transport starts running. The re-
versal position of the cross transport is checked in a duration
test.
1. Start the test:
• Press the % key
3. Complete the test:
• Press the ( key
F3 A-HEAD TESTS
F4 B-HEAD TESTS
F5 C-HEAD TESTS
These functions are used to check the sewing motors and the pertai-
ning stepper motors for the sewing and transport units. The test rou-
tines are identical for the A and B machines. The menu C-HEAD
TESTS merely contains a routine that controls the sewing motor.
F1 SEWING MOTOR CONTROL
The nominal speed of the stepper motor is compared to the actu-
al motor speed.
1. Enter the desired speed at the numeric keypad.
2. Confirm input and start measurement:
Press the % key
The motor starts running, the actual speed is measured and displayed.
3. Complete test:
• Press the ( key