Beisler 1360-4 - Manual (Page 52)

C-12
Service Instructions Automatic Multi-Head Serging Machine 1365-4 Beisler GmbH
C.5
Maintenance
NOTE - Repairs!
Any repairs to the machine must only be carried out by an
authorized Technical Service or by personnel that has
been instructed about the setting up and maintenance of
the machine on the occasion of a training by the supplier
or manufacturer of the machine.
NOTE - Liability!
Use only original spare parts for installing or replacing
machine components.
The manufacturer and supplier will not assume liability for
spare parts from third-party suppliers.
C.5.4 Removing/installing the operating panel
1. Disconnect machine from power supply.
2. Remove two locating screws and disconnect interface connector.
3. Remove retaining screws from operating panel bracket.
4. Remove operating panel, install new panel and secure using screws.
5. Connect interface connector to RS 232 interface and secure using
two locating screws.