beautypg.com

Useful functions, Automatic thread cutting – Baby Lock Destiny (BLDY) Instruction & Reference Guide-Part1 User Manual

Page 93

background image

USEFUL FUNCTIONS

Se

wi
n

g Ba

sics

91

2

Automatic Thread Cutting

After selecting a stitch pattern, turn on the
automatic thread cutting function before sewing,
and the machine will automatically sew
reinforcement stitches (or reverse stitches,
depending on the stitch pattern) at the beginning
and end of sewing, and trim the threads at the end
of sewing. This function is useful when sewing
buttonholes and bar tacks.

a

Select a stitch pattern.

b

Press

to set the automatic thread

cutting function.

→ You get

, and the machine is set for

automatic thread cutting function and automatic
reverse/reinforcement stitching.

c

Set the fabric in the start position and start
sewing.

a Reverse stitches (or reinforcement stitches)
→ The machine will automatically sew reverse stitches

(or reinforcement stitches) and then continue
sewing.

d

Once you have reached the end of the
stitching, press “Reverse Stitch” button or
“Reinforcement Stitch” button once.

If stitching, such as buttonholes and bar tacking, that
includes reinforcement stitching has been selected,
this operation is unnecessary.

a The point where the “Start/Stop” button was

pressed.

b The point where the “Reverse Stitch” button or the

“Reinforcement Stitch” button was pressed.

c The thread is cut here.

USEFUL FUNCTIONS

Memo

• To turn off the automatic thread cutting

function, press

again, so it appears as

.

• This function is set automatically when

sewing embroidery.

Memo

• If you press the “Start/Stop” button to

pause sewing, press the same button again
to continue. The beginning reverse/
reinforcement stitches will not be sewn
again.

Memo

• The automatic thread cutting function will

not be performed if the “Start/Stop” button
is pressed while sewing. Press the “Reverse
Stitch” button or the “Reinforcement Stitch”
button at the end of the stitching.

3

2

1