Baby Lock Destiny (BLDY) Instruction & Reference Guide-Part1 - Manual (Page 148)

SEWING THE STITCHES
146
b
Insert the top left yarn guide into the slot on
the top left of the machine.
a Slot
c
Press to lock all keys and buttons.
d
Attach the dual feed foot to the machine
without attaching the toe of the couching
dual feed foot.
* Refer to “Attaching the Dual Feed Foot” on page 70.
e
Pass the yarn, etc. through the telescopic
thread guide and the yarn guide (1) to (2).
f
Thread the yarn, etc. to the couching toe.
Pass the yarn through the loop in the yarn
threader wire needle and then pass the
threader from top to bottom through the
hole on the couching toe.
g
Attach the toe of the couching dual feed
foot shown below to the dual feed foot.
h
Pull out the yarn for about 100 mm
(4 inches) to the back of the machine.
i
Press to unlock all keys and buttons.
■ Sewing Decorative Couching
a
Select .
b
Measure the width of the yarn, etc. and set
the stitch width according to the width of
the yarn, etc.
Note
• Make sure that the yarn, etc. does not
become entangled as you work.
Note
• Make sure that there are enough width to
wrap over the yarn, etc.
• You can adjust the stitch width while
checking the camera view. Refer to
“Checking the Needle Location in the
Screen” on page 96.
a Zigzag stitch
b Yarn