Baby Lock Destiny (BLDY) Instruction & Reference Guide-Part1 - Manual (Page 111)

SELECTING UTILITY STITCHES
U
tili
ty
S
tit
ch
es
109
3
■ Key Functions
No. Display Key Name Explanation Page
a Utility stitch key Press this key to select a straight stitch, zigzag stitch, buttonhole, blind hem
stitch, or other stitches commonly used in garment construction. 111
b Character/Decorative
stitch key Press this key to select character or decorative stitch patterns. 168
c Image key Press this key to display an enlarged image of the selected stitch pattern. 112
d Free motion mode
key Press this key to enter free motion sewing mode.
The presser foot is raised to an appropriate height and the feed dog is lowered
for free motion quilting. 131
e Mirror image key Press this key to create a mirror image of the selected stitch pattern. If the key
display is light gray, a mirror image of the selected stitch pattern cannot be
sewn. 111
f Needle mode
selection key (single/
double) Press this key to select twin needle sewing mode. The sewing mode changes
between single needle mode and twin needle mode each time you press the
key. If the key display is light gray, the selected stitch pattern cannot be sewn
in the twin needle mode. 63
g Back to beginning key When sewing is stopped, press this key to return to the beginning of the stitch. 112
h Single/Repeat sewing
key Press this key to choose single stitches or continuous stitches. 112
i Sensor function key Press this key to use the sensor function. 98
j Edge sewing key Using the built-in camera, press this key to measure the width of the area from
the edge of the fabric to the stitch and set the camera for edge sewing. 160
k Retrieve key Press this key to retrieve a saved pattern. 113
l Manual memory key Change the stitch pattern settings (zigzag width and stitch length, thread
tension, automatic thread cutting or automatic reinforcement stitching, etc.),
then save them by pressing this key. Five sets of settings can be saved for a
single stitch pattern. 113
m Reset key Press this key to return the selected stitch pattern saved settings to the default
settings. 88-90
n Thread tension key Shows the automatic thread tension setting of the currently selected stitch
pattern. You can use the plus and minus keys to change the thread tension
settings. 90
o “L/R Shift” key
Press to shift the stitch pattern to the right or press to shift the pattern
to the left. This feature is not available for all patterns. Only those applicable
will be shifted. The machine default setting is highlighted.
89
a
e
j
k
l
m
n
r
q
b c
d
g
f
i
h
o p
t
s
u