Baby Lock Destiny (BLDY) Instruction & Reference Guide-Part1 - Manual (Page 117)

SEWING THE STITCHES
U
tili
ty
S
tit
ch
es
115
3
c
Hold the thread tail and fabric with your
left hand, and rotate the handwheel with
your right hand to insert the needle into the
fabric.
a Sewing start position
d
Lower the presser foot, and hold the
“Reverse Stitch” button or the
“Reinforcement Stitch” button to sew 3-4
stitches.
→ The machine sews reverse stitches or reinforcement
stitches.
e
Press the “Start/Stop” button to sew
forward.
a Reverse stitches or reinforcement stitches
→ The machine will begin sewing slowly.
f
When sewing is completed, hold the
“Reverse Stitch” button or the
“Reinforcement Stitch” button to sew 3-4
reverse stitches or reinforcement stitches at
the end of the seam.
g
After sewing, press the “Thread Cutter”
button to trim the threads.
CAUTION
• Be sure the needle does not strike a basting
pin, or any other objects, during sewing. The
thread could tangle or the needle could break,
causing injury.
Memo
• When the automatic thread cutting and
automatic reinforcement stitch keys on the
screen are selected, reverse stitches or
reinforcement stitches will be sewn
automatically at the beginning of sewing
when the “Start/Stop” button is pressed.
Press the “Reverse Stitch” button or the
“Reinforcement Stitch” button to sew
reverse stitches or reinforcement stitches
and trim the thread automatically at the end
of sewing.