Baby Lock Destiny (BLDY) Instruction & Reference Guide-Part1 - Manual (Page 86)

SEWING
84
c
Set the fabric in the start position and begin
sewing.
a Reverse stitches (or reinforcement stitches)
→ The machine will automatically sew reverse stitches
(or reinforcement stitches) and then continue
sewing.
If you press the Start/Stop button to pause sewing,
press it again to continue. The machine will not
sew reverse/reinforcement stitches again.
d
Press “Reverse Stitch” button or
“Reinforcement Stitch” button).
a Reverse stitches (or reinforcement stitches)
→ The machine will sew reverse stitches (or
reinforcement stitches) and stop.
The operation performed when the button is
pressed differs depending on the selected pattern.
Refer to the following table for details on the
operation that is performed when the button is
pressed.
* If “Reinforcement Priority” of the settings screen is set to
“ON” (see page 31), reinforcement stitches are sewn
instead of reverse stitches.
Memo
• Some stitches, such as buttonholes and bar
tacks, require reinforcement stitches at the
beginning of sewing. If you select one of
these stitches, the machine will
automatically turn on this function (the key
appears as when the stitch is selected).
Memo
• To turn off the automatic reinforcement
stitching function, press again, so it
appears as .
“Reverse Stitch”
button
“Reinforcement
Stitch” button
+
Machine starts
sewing the stitches
and only sews
reverse stitches
while holding the
“Reverse Stitch”
button. Machine starts
sewing the stitches
and sews 3 – 5
reinforcement
stitches while
holding the
“Reinforcement
Stitch” button.
+
Machine starts
sewing the stitches
and only sews
reverse stitches
while holding the
“Reverse Stitch”
button.* Machine starts
sewing the stitches
and sews 3 – 5
reinforcement
stitches while
holding the
“Reinforcement
Stitch” button.
+
Machine sews
reverse stitches at
the beginning and
end of sewing. Machine sews
reverse stitches at
the beginning and
reinforcement
stitches at the end of
sewing.
+
Machine sews
reinforcement
stitches at the
beginning and
reverse stitches at
the end of sewing.* Machine sews
reinforcement
stitches at the
beginning and end of
sewing.
+
Machine starts
sewing and then
sews reinforcement
stitches while
holding the “Reverse
Stitch” button. Machine starts
sewing at the
beginning, then
completes the
pattern and sews
reinforcement
stitches at the end of
sewing.
+
Machine sews
reinforcement
stitches at the
beginning and sews
reinforcement
stitches when the
“Reverse Stitch”
button is pressed. Machine sews
reinforcement
stitches at the
beginning, then
completes the
pattern and sews
reinforcement
stitches at the end of
sewing.