Avery Dennison 6035 Programmer Manual Rev.CA 6/01 - Manual (Page 216)

Sample Applications A-5
S a m p l e 5
Function
Uses the scanner.
Algorithm
1. Enables the scanner with scnOpenScanner.
2. Waits for the operator to press the trigger.
3. Initiates a scan with scnGets.
4. Disables the scanner with scnCloseScanner.
S a m p l e 6
Function
Scans and prints.
Algorithm
1. Initializes the Print subsystem using pclInit without allocating
font storage memory.
2. Calibrates the supplies with pclCalibrate.
3. Loads a fixed format with pclWrite.
4. Enables the scanner with scnOpenScanner.
5. Waits for the operator to press the trigger or b. If the
operator presses b, continue with step 13.
6. Initiates a scan with scnGets.
7. Uses pclBatteryOktoPrint to check whether the battery is
charged enough for printing.
8. Prompts the operator to enter a quantity and press either the
trigger or e. Or, if the operator presses b, jump to
step 13.