Avery Dennison 6035 Programmer Manual Rev.CA 6/01 - Manual (Page 201)

7-10 Programmer’s Manual
R D I S K . S Y S
Description
To use the second flash ROM, use the RDISK.SYS driver, as
follows:
1. Enter the line listed below (under “Syntax”) in CONFIG.SYS.
2. Load the first flash ROM’s disk image (including RDISK.SYS
and CONFIG.SYS in it).
3. Load the disk image for the second flash ROM.
See “Loading Disk Images into the Printer” in Chapter 3 for
more information.
Syntax
DEVICE=RDISK.SYS