Avery Dennison Monarch 9860 Operator Handbook User Manual
Page 93

O f f l i n e P r i n t i n g
Refer to the keyboard’s Operating Instructions for more
information about offline printing and batch entry.
S p e c i a l P r i n t i n g C o n s i d e r a t i o n s
Keep in mind the following special printing considerations.
Maximum
Print Speed
Printing Method
Printhead
Density
Knife
2.5/4.0/6.0
ips (inches
per second)
Thermal Direct
Thermal Transfer
203/300 dpi
dots per inch
Supported
8.0 ips
Thermal Direct
Thermal Transfer
203/300 dpi
Supported
◆
94x5 emulation is not supported using 300 dpi.
◆
The maximum supply and image length with the optional 300
dpi printhead is 12.0 inches (305 mm).
◆
The recommended minimum cut feed length is 1.5 inches
(38 mm).
◆
You may need to clean the printhead and platen roller more
frequently when printing at high speeds. See Chapter 4,
"Care and Maintenance," for more information.
P r i n t i n g Tr u e Ty p e ® F o n t s
TrueType® fonts are available on this printer. TrueType fonts are
scalable and the characters print smoothly, without the jagged
edges you see on bitmap fonts. When downloading a TrueType
font, you download the entire font. You cannot specify a subset
(particular characters or point size) of the font.
Printing
11-7