Avery Dennison Monarch 9860 Operator Handbook - Manual (Page 107)

Supply Types: Thermal Transfer or Direct
Supply Widths: 0.75 inches (19 mm) minimum
4.25 inches (108 mm) maximum
Supply Lengths: 0.32 inches (8 mm) minimum
See "Tag Cut Dimensions" for minimum and
maximum cut tags
17.5 inches (445 mm) maximum
Total Thickness: 9 mils to 12 mils (tags)
5.5 mils to 12 mils (labels)
Do not cut labels.
R i b b o n S p e c i f i c a t i o n
Do not leave ribbon in sunlight, high temperatures or humidity.
Ribbon Type: Standard or High Energy
Ribbon Widths Use with Max. supply width
1.5 inches (38 mm) 1.3 inches (33 mm)
1.8 inches (46 mm) 1.5 inches (38 mm)
2.3 inches (58 mm) standard
or high energy 2.0 inches (51 mm)
3.3 inches (84 mm) 3.0 inches (76 mm)
4.3 inches (110 mm) standard
or high energy 4.0 inches (102 mm)
Ribbon Length: 23,600 inches (600 meters)
A b o u t R i b b o n s
The width of the ribbon must be greater than the supply width.
Since some supplies are more abrasive to printheads than others,
using a ribbon wider than your supply helps protect the printhead.
Replacement printheads are expensive.
Specifications
A-3