Avery Dennison Monarch 9860 Operator Handbook - Manual (Page 47)

To change the setting, from the Main Menu, select Setup, Supply,
then Positioning. Then, follow these steps.
1. Press l or r until you see
POSITIONING
l
Print Pos
r
2. Press N. The current setting is displayed, for example:
Enter print pos
[-99/99]: +0
3. Press l or r to change the print position. Pressing l
decreases the value (moves the image down); rincreases it
(moves the image up).
4. Press N when the number you need appears. Press E
until you see the Main Menu.
Setting Supply Options
6-9