Avery Dennison Monarch 9860 Operator Handbook User Manual
Page 83

D o w n l o a d i n g a S c r i p t
Follow these instructions to download a script from the MS DOS
prompt. Set the communication parameters using the MODE
command. Then, prepare the printer to accept a script.
1. From the printer’s Script Menu, press l or r until you see
SCRIPTS
Load Script
r
2. Press
N.
Script Load
Ready
Only one script can be loaded in the printer at
a time.
When downloading a script, if you receive an error:
◆
Check the available flash memory. See "Checking Available
Flash Memory" in Chapter 9.
◆
Format flash memory. See "Formatting Flash Memory" in
Chapter 9.
After downloading a script, if the script does not appear to be
loaded, try formatting flash memory and download the script again.
Using Scripts
10-3
This manual is related to the following products: