Avery Dennison Monarch 9860 Operator Handbook - Manual (Page 51)

2. Press N. The current setting is displayed, for example:
Enter knife adj
[-300/300]: +0
3. Press l or r to change the cut position. Pressing l
decreases the value (moves the cut down);
r increases it
(moves the cut up).
4. Press N when the number you need appears. Press E
until you see the Main Menu.
D i s p e n s e P o s i t i o n
This function adjusts the stopping point of the label.
To change the setting, from the Main Menu, select Setup, Supply,
then Positioning. Follow these steps.
1. Press l or r until you see
POSITIONING
l
Dispense Pos
r
2. Press N.
DISPENSE POS
[50/200]: +65
3. Press l or r to change the dispense position. Pressing l
decreases the value;
r increases it.
4. Press N when the number you need appears. Press E
until you see the Main menu.
Setting Supply Options
6-13