Avery Dennison Monarch 9860 Operator Handbook - Manual (Page 25)

C A R E A N D M A I N T E N A N C E
4
This chapter tells you how to
◆ clear label jams and clean the printer
◆ replace a printhead
◆ adjust print contrast.
CAUTION
Do not use sharp objects to clean the printhead or
touch the printhead with your fingers. This may
damage the printer and require a service charge.
C l e a r i n g L a b e l J a m s
When you are printing and a jam occurs, an error appears on the
keyboard. To clear the jam:
1. Turn off the printer and open the cover and printhead
assembly.
2. If necessary, remove the supply roll and ribbon.
3. Remove the jammed supply and reload the supply roll.
4. Close the printhead assembly and turn on the printer.
5. On the keyboard, press Feed (
F) to position the supply
under the printhead.
C l e a n i n g
The rate and frequency at which you print determines how often
you must clean the printer.
You must clean the printhead as described below to
maintain printhead life.
Care and Maintenance
4-1