Avery Dennison Monarch 9860 Operator Handbook - Manual (Page 69)

3. Press l or r to display the word length you need, then
press N. Press E until you see the Main Menu.
S t o p B i t s
To change the setting, from the Main Menu select Setup, Port
Settings, then Serial Comm. Then, follow these steps.
1. Press l or r until you see
SERIAL COMM
l Stopbits r
2. Press N. The current setting is displayed, for example:
STOPBITS
1
r
3. Press l or r to display the number of stop bits you need,
then press
N. Press E until you see the Main Menu.
Pa r i t y
To change the setting, from the Main Menu select Setup, Port
Settings, then Serial Comm. Then, follow these steps.
1. Press l or r until you see
SERIAL COMM
l
Parity
r
Communication Values
8-3