Avery Dennison Monarch 9860 Operator Handbook User Manual
Page 46

P o s i t i o n i n g
This menu includes selections to change the print, supply, margin,
cut, and dispense positions along with the backfeed distance.
When you see
Enter print pos
[-99/99]: +0
Feed (
F) acts as a toggle switch to change the value by 10 or 1.
For example, to make the print position 23 (from the default of 0),
press
F, then press r twice (20), press
F again and press r
three times (23).
P r i n t P o s i t i o n
This function adjusts where data prints vertically on the supply.
Adjust the print if it is too close to the top or bottom of the supply,
or overtypes the pre-printed area. One dot is 0.0049 inch.
◆
If the data is too close to the bottom, increase the number.
◆
If the data is too close to the top, decrease the number.
Changing this setting only affects new
formats sent to the printer.
6-8 Setting Supply Options