Avery Dennison Monarch 9860 Operator Handbook - Manual (Page 52)

B a c k f e e d D i s t a n c e
This is the amount to move the label backwards. The backfeed
distance can not be greater than the dispense position. If you
make the backfeed distance greater than the dispense position,
the dispense position automatically changes to match the
backfeed distance. The backfeed distance should equal the
dispense position.
To change the setting, from the Main Menu, select Setup, Supply,
then Positioning. Follow these steps.
1. Press l or r until you see
POSITIONING
l
Backfeed Dis
2. Press N.
BACKFEED DIS
[10/200]: +65
3. Press l or r to change the dispense position. Pressing l
decreases the value;
r increases it.
4. Press N when the number you need appears. Press E
until you see the Main menu.
6-14 Setting Supply Options