Avery Dennison Monarch 9860 Operator Handbook User Manual
Page 12
Ask your System
Administrator which
method you will use to
communicate with the
host:
Serial Communication
9 to 25 pin cable
(Part #118364)
25 to 25 pin cable
(Part #118366)
Parallel Communication
IEEE-1284 or
Centronics® mode cable
(Part #118363)
C o n n e c t i n g t h e C o m m u n i c a t i o n C a b l e
Connect the communication cable into the appropriate port.
Secure the cable with the connecting screws (serial) or spring
clips (parallel).
If you are communicating with the host through the serial port,
make sure the printer’s communication values match those at the
host. The factory default values are 9600 Baud, 8 bit data frame,
1 stop bit, no parity, and DTR flow control.
The printer also has a USB (Universal Serial Bus) Version 1.1
communication port. Drivers are available on our Web site for a
variety of operating systems.
The printer supports a baud rate up to
115200. Make sure your host is capable of
communicating at the speed you
select for the printer.
Power Cable
goes here
Parallel Port
Serial Port
USB Port
1-4 Getting Started