Avery Dennison FreshMarx 9417 System Administrator Guide - Manual (Page 61)

Performing Maintenance 8-7
P e r f o rm i n g a F ac t o r y R e s et
Use Factory Reset to delete all data files from the printer. Data files include the product button
information, password, and printer configuration settings.
It may be necessary to delete data files when there are errors in the current data files.
Note: Before deleting the printer’s data files, you may want to upload the Product Data file to
your computer or to a USB Flash Drive to save the product button information. See
“Uploading the Product Data File” or “Copying a Data File to a USB Flash Drive” for
more information.
1. Press the Tools button.
2. Press Admin.
3. Enter the Admin password and press Enter. The default password is 1234.
4. Press Maintenance.
5. Press Factory Reset. A warning message appears.
6. Press Yes to delete all data files. The printer deletes all data files and loads the default
data files. The printer restarts. Press No to cancel.
Note: All data files are deleted when you select Yes; they cannot be recovered. You cannot
select a specific file to delete.